Sony SRS-X99 Help Manual Download Page 336

Page: 336 / 359

Personal Audio System

SRS-X99

The sound is interrupted

The DLNA server is overloaded. Quit all running applications.

Wireless signal condition is poor. Stop using your microwave oven, etc.

The communication speed of the Wi-Fi network may become slower for IEEE802.11n-compliant wireless

routers/access points if the security method is set to WEP or WPA/WPA2-PSK (TKIP). If the speed slows down,

change the security method to WPA/WPA2-PSK (AES). The encryption (security) scheme varies depending on the

device. For details, refer to the operating instructions of your router/access point.

If the sound is interrupted or noise is generated via a Wi-Fi connection, connect the speaker and wireless router via a

commercially-available LAN cable, instead of via Wi-Fi. If the quality does not improve, also connect the computer

and wireless router via a commercially-available LAN cable.

If the sound is interrupted or noise is generated during high-resolution audio playback when compared to MP3, AAC,

or other audio compressions, connect the speaker and wireless router via a commercially-available LAN cable,

instead of via Wi-Fi. If the quality does not improve, also connect the computer and wireless router via a

commercially-available LAN cable.

Summary of Contents for SRS-X99













































































































































































































































































































































Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands

Sony SRS-X99, Help Manual

Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands