Sony SRS-X99 Help Manual Download Page 327

Page: 327 / 359

Personal Audio System

SRS-X99

The speaker cannot connect to the network (Other equipment on the network cannot find or recognize the speaker)

It takes about 1 minute for the speaker to acquire an IP address when it is turned on in a communication environment

without a router.

If you use a fixed IP address, the same IP address might be used already in use by other equipment. Therefore, use a

different IP address.

There is more than one home network. The computer and smartphone are connected to a different network than the

speaker.

Confirm that the Wi-Fi antenna is set.

If the settings are correct, try the following.

Turn off the wireless router/access point, wait a while and turn on the power again.

Turn off the speaker, wait a while and turn on the power again.

4-567-508-11(1)

Help Guide

Troubleshooting

318

Summary of Contents for SRS-X99













































































































































































































































































































































Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands

Sony SRS-X99, Help Manual

Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands