Sony SRS-X99 Help Manual Download Page 314

Page: 314 / 359

Personal Audio System

SRS-X99

What is LDAC?

LDAC is an audio coding technology developed by Sony that enables the transmission of High-Resolution (Hi-Res)

Audio content, even over a BLUETOOTH connection. Unlike other BLUETOOTH compatible coding technologies such as

SBC, it operates without any downconversion of the Hi-Res Audio content

, and allows approximately three times more

data

than those other technologies to be transmitted over a BLUETOOTH wireless network with unprecedented sound

quality, by means of efficient coding and optimized packetization.

excluding DSD format contents

in comparison with SBC (Subband Coding) when the bitrate of 990 kbps (96/48 kHz) or 909 kbps (88.2/44.1kHz) is selected

Note

Depending on the network environment, there may be an interruption at the high bitrate transmission.

4-567-508-11(1)

Help Guide

How to Use

305

Summary of Contents for SRS-X99













































































































































































































































































































































Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands

Sony SRS-X99, Help Manual

Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands