background image

SONY SRS-D21 (GB/FR/ES) 2-639-674-

11

(1)

 

2005 Sony Corporation           

Printed in Malaysia

Operating Instructions
Mode d’emploi
Manual de instrucciones

Active Speaker System

SRS-D21

2-639-674-

11

(2)

If the TV picture or monitor display is
magnetically distorted

Although this system is magnetically shielded, there may
be cases that the picture on some TV sets/personal
computers may become magnetically distorted. In such a
case, turn off the power of the TV set/personal computer
once, and after 15 to 30 minutes turn it on again. In the
case of a personal computer, take appropriate measures,
such as data storage, before turning it off.
When there seems to be no improvement, locate the
system farther away from the TV set/personal
computer. Furthermore, be sure not to place objects in
which magnets are attached or used near the TV set/
personal computer, such as audio racks, TV stands, toys
etc. These may cause magnetic distortion to the picture
due to their interaction with the system.

On placement

• Do not set the speakers in an inclined position.
• Do not leave the system in a location near heat

sources, or in a place subject to direct sunlight,
excessive dust, moisture, rain or mechanical shock.

On cleaning

Do not use alcohol, benzene, or thinner to clean the
cabinet.

If you have any questions or problems concerning your
speaker system, please consult your nearest Sony
dealer.

Hooking up the system

(See fig. 

A

)

1

Connect the control cord of the left
satellite speaker to the Din jack of the
subwoofer with their respective arrows
aligned.

2

Connect the input cord of the left
satellite speaker to the source
equipment.

PC, CD/MD Walkman etc.:

Connect the left satellite speaker and the LINE
OUT or headphones jack of a PC, CD/MD
Walkman, etc. with the input cord. For details,
refer to the operating instructions of the source
equipment.

3

Connect the subwoofer to the wall
outlet.

4

Position the speakers. (See fig. 

B

)

Listening to the sound 

(See fig. 

C

)

First, turn down the volume on the left satellite speaker.
The volume should be set to minimum before you begin
playing the programme source.

1

Set the OPERATE switch to ON on the left
satellite speaker.

The OPERATE indicator lights up.

2

Turn on the equipment connected to the
left satellite speaker.

3

Adjust the VOLUME control on the left
satellite speaker.

When connecting to the headphone output, also
adjust the volume of the connected component.
After listening, set the OPERATE switch to OFF.
The OPERATE indicator goes off.

Using the headphones/
earphones

Connect the headphones/earphones to the 

i

(headphones) jack on the left satellite speaker.

Note

Turn off the MEGA BASS or BASS BOOST (Walkman,
etc.) function as it may cause audible distortion.

C

English

Before operating the unit, please read this manual
thoroughly and retain it for future reference.

WARNING

To prevent fire or shock hazard, do not expose the
unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
To prevent fire, do not cover the ventilation of the
apparatus with newspapers, tablecloths, curtains, etc.
Do not place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.

Do not install the appliance in a confined space,

such as a bookcase or built-in cabinet.

CAUTION

You are cautioned that any changes or modification not
expressly approved in this manual could void your
authority to operate this equipment.

NOTICE FOR THE CUSTOMERS IN THE USA

This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.

Precautions

On safety

• The nameplate indicating operating voltage, power

consumption, etc., is located on the rear exterior.

• Before operating the system, be sure that the

operating voltage of the system is identical with that
of your local power supply.

Where purchased

Operating voltage

U.S.A./Canada

120 V AC, 60 Hz

European countries

220 – 230 V AC, 50 Hz

Other countries

• 120 V AC, 60 Hz
• 220 – 230 V AC, 50 Hz

• The unit is not disconnected from the AC power

source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.

• Unplug the system from the wall outlet if it is not to

be used for an extended period of time. To disconnect
the cord, pull the cord by grasping the plug. Never
pull the cord itself.

• Should any liquid or solid object fall into the system,

unplug the system’s power cord and have the system
checked by qualified personnel before operating it
any further.

• The AC power cord should be changed only at a

qualified service shop.

• For efficient heat dissipation, ensure there is sufficient

space to the rear of the subwoofer. Also, avoid
placing objects on the unit.

• Do not insert your hand or any objects into the hole

of the subwoofer and satellite speaker.

On operation

• Do not drive the speaker system with a continuous

wattage exceeding the maximum input power of the
system.

• Before connecting, turn off the speaker system, the

PC and audio component to avoid damaging the
speaker system.

• The volume level should not be turned up to the

point of distortion.

• Although this system is magnetically shielded, do not

leave recorded tapes, watches, personal credit cards
or floppy disks using magnetic coding in front of the
system for an extended period of time.

Subwoofer (1)

A

Package Contents

Troubleshooting

Should you encounter a problem with your speaker
system, check the following list and take the indicated
measures. If the problem persists, consult your nearest
Sony dealer.

There is no sound from the speaker system.

• Make sure all the connections have been correctly

made.

• Make sure the volume on the left satellite speaker and

the connected component have been turned up
properly.

• Check if the headphones are connected. If they are,

disconnect them.

The sound is distorted.

• Turn down the volume level on the connected

component. Or, if the connected component has a
BASS BOOST function, set it to off.

• Turn VOLUME on this unit down to reduce the

volume.

There is hum or noise in the speaker output.

• Make sure all the connections have been correctly

made.

• Make sure none of the audio components are

positioned too close to the TV set.

The sound has suddenly stopped.

Make sure all the connections have been correctly
made.

The brightness of the OPERATE indicator is
unstable.

The brightness of the OPERATE indicator may become
unstable when the volume is turned up. This is not a
malfunction.

Specifications

Speaker section

Satellite speaker

Speaker system

Full range, magnetically shielded

Speaker units

5.7 cm, cone type

Enclosure type

Bass reflex

Impedance

Cord length

1.5 m (Left satellite speaker to right
satellite speaker)

Subwoofer

Speaker system

Woofer

Speaker units

10 cm, cone type

Enclosure type

ASW (Acoustic Super Woofer Type)

Impedance

Amplifier section

Rated output

2 W (10% T.H.D., 1 kHz, 8 

)

(Satellite speaker)
16 W (10% T.H.D., 100 Hz, 4 

)

(Subwoofer)

Input

Input cord with stereo mini plug
(1.8 m) 

×

 1

Input impedance

4.7 k

 (at 1 kHz)

Output

Stereo mini jack 

×

 1 (

(headphones))

General

Dimensions (w/h/d)

Approx. 76 

×

 163 

×

 80 mm

(3 

×

 6 

1

/

2

 

×

 3 

1

/

4

 in.) (Satellite speaker)

Approx. 154 

×

 241 

×

 176 mm

(6 

1

/

8

 

×

 9 

1

/

2

 

×

 7 in.) (Subwoofer)

Mass

Approx. 286 g (10 oz.)
(Left satellite speaker)
Approx. 180 g (6 oz.)
(Right satellite speaker)
Approx. 2.5 kg (5 lb. 8 oz.)
(Subwoofer)

Cord length

1.8 m (Control cord)
2 m (Power cord)

Power consumptions

22 W

Optional accessory

Plug adaptor PC-236MS

Design and specifications are subject to change without
notice.

VOLUME:

 Controls total volume level.

(headphones) 

:

 Connect the headphones for personal listening.

Printed on 100 % recycled paper using VOC
(Volatile Organic Compound)-free vegetable oil based ink.

This warranty is valid only in the United States.

Left satellite
speaker (rear)

Input cord

to LINE OUT or
headphones jack
(stereo mini-jack)

CD/MD
Walkman*, etc

PC, etc

PC, CD or MD Walkman, etc.

Satellite speaker
(Left)

Subwoofer

Satellite speaker
(Right)

OPERA

TE VOLUME

ON    OFF

VOLUME

OPERATE

Right satellite
speaker (rear)

Satellite speaker (2)

* “WALKMAN” is a registered

trademark of Sony Corporation to
represent Headphone Stereo products.

Left satellite speaker

OPERATE indicator

to Din jack

Subwoofer (rear)

to wall outlet

Control cord

B

04US_SRSD21

7/3/05, 9:22 PM

1

Reviews: