Sony SRS-BTM30 - Wireless Speaker Sys Service Manual Download Page 1

SERVICE MANUAL

Sony Corporation

Personal Audio Division
Published by Sony Techno Create Corporation

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

WIRELESS SPEAKER SYSTEM

9-887-439-03

2007E16-1
© 2007.05

Ver. 1.2  2007.05

SPECIFICATIONS

SRS-BTM30

Speaker section

Speaker system

48 mm, Full range, magnetically shielded

Enclosure type

Bass reflex

Impedance

Rated input power

3 W

Maximum input power

6 W

Amplifier section

Rated output

3 W + 3 W (10% T.H.D., 1 kHz, 4 

)

Bass Boost

MEGA BASS

Audio input

Stereo minijack 

×

 1

Input impedance

4.7 k

 (at 1 kHz)

General

Power

Three R6 (size AA) batteries, DC 5.2V
(supplied AC power adaptor)

Dimensions (w/h/d)

Approx. 280 

×

 111 

×

 140 mm

(11 

1

/

8

 

×

 4 

3

/

8

 

×

 5 

5

/

8

 in.)

Mass

Approx. 750 g (1 lb. 10 oz.) including batteries

Communication System

BLUETOOTH Specification version 2.0

Output

BLUETOOTH Specification Power Class 2

Maximum communication range

Line of sight approx. 10 m (30 ft)*

1

Frequency band

2.4 GHz band (2.4000 GHz–2.4835 GHz)

Modulation method

FHSS

Compatible BLUETOOTH Profiles

*

2

A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Visual Remote Control Profile)
Volume UP/DOWN

Supported Codecs

*

3

SBC*

4

, MP3

*

1

The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity, aerial’s
performance, operating system, software
application, etc.

*

2

BLUETOOTH standard profiles indicate the
purpose of BLUETOOTH communication
between devices.

*

3

Codec: Audio signal compression and

conversion format

*

4

Subband Codec

Supplied accessories

AC Power Cord (Mains lead) (1)
AC power adaptor (1)
Operating Instructions (1)

Optional accessories

Connecting cord RK-G136, RK-G138

Plug adaptor PC-234S, PC-236MS

The above optional accessories are not provided
in some areas.

Design and specifications are subject to change
without notice.

The Bluetooth word mark and logos are owned
by the Bluetooth SIG, Inc. and any use of such
marks by Sony Corporation is under license.
Other trademarks and trade names are those of
their respective owners.

MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.

Summary of Contents for SRS-BTM30 - Wireless Speaker Sys

























Reviews: