7
Location and Function of Parts
Location and Function of Parts
Front Panel
A
POWER button & Power Indicator
This turns the power to the unit on and off. Power indicator
lights up (green) when power is on.
B
MONO INPUT knobs
Use to adjust the mixing level on MONO INPUT channels
1 - 6.
C
STEREO INPUT knobs
Use to adjust the mixing level on STEREO INPUT
channels 1 - 3.
The ST3 audio is output from REC OUTPUT connectors.
Therefore no signal loop occurs and sounds can be safely
recorded even if the ST3 INPUT knob is still set high
during recording. (See illustration.)
D
MODE button
Selects how to use the MASTER OUTPUT.
At MONO (
R
) issues a monaural output, at STEREO (
r
)
issues a stereo output.
E
MASTER OUTPUT knob
Use this knob to adjust the output level at the MASTER
OUTPUT connectors.
F
SUB OUTPUT knob
Use this knob to adjust the output level at the SUB
OUTPUT connectors.
G
SIGNAL indicators
This indicator lights up when input with a signal ranging
from standard input level to more than –20dB.
H
+48V indicator
This indicator lights up when power (+48V DC) is
supplied to the MONO INPUT connectors.
I
PEAK indicator
Warns that the output signal is too high.
The INPUT knob must be adjusted when this indicator
keeps lighting up. (If indicator lights up only occasionally
then there is no problem.)
SIGNAL
SIGNAL
SIGNAL
SIGNAL
MONO
STEREO
SIGNAL
SIGNAL
SIGNAL
SIGNAL
SIGNAL
PEAK
MODE
MASTER
SUB
AUDIO MIXER SRP-X100
MONO
STEREO
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
ON
R
R
r
r
OFF
MAX
+
48V
LINE
L
R
LINE
L
R
POWER
1
2
3
1
2
3
5
6
4
0
0
1
2
7
3
4
9
8
5
6
SRP-X100
REC
OUTPUT
OUTPUT
MASTER
Recorder
ST3
INPUT
When
recording
Sound signal
of
except ST3
