background image

1

COMPRESSOR/EXPANDER

SRP-L210

Operating Instructions

Before operating the unit, please read this manual and the
supplied “WARNING” thoroughly and retain it for future
reference.

Table of contents

WARNING .................................................................................. 2
Features ........................................................................................ 2
Dimensions .................................................................................. 3
Block diagram ............................................................................. 3
Location and function of parts .................................................. 4
Applications ................................................................................ 6
Specifications ............................................................................... 7

Precautions

On safety

 

(Refer to the supplied “WARNING”.)

Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by qualified personnel
before operating it any further.

Unplug the unit from the wall outlet if it is not to be used
for an extended period of time. To disconnect the cord, pull
it out by grasping the plug. Never pull the cord itself.

On installation

Do not install the unit in a location near heat sources such as
radiators or air ducts, or in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.

On operation

Before making program source connections, be sure to turn
the power switch off and unplug the unit.

When the unit is not used, turn the power off to conserve
energy and to extend the useful life of your unit.

On cleaning the cabinet

Clean the cabinet, panel and controls with a soft cloth
lightly moistened with mild detergent solution. Do not use
any type of abrasive pad, scouring powder or solvent such
as alcohol or benzine.

On repacking

Do not throw away the carton and the packing material. It
makes an ideal container to transport the unit in.
When shipping the unit for repair work or to another
location, repack it as it was.
If you have any questions or problems concerning your
unit, please contact your nearest Sony dealer.

2-346-164-11(1)

© 1999 by Sony Sound Tec Corporation

Summary of Contents for SRP-L210









Reviews: