manualshive.com logo in svg

Sony SRG-H40UH, Operating Instructions Manual, Page: 30 / 54

Share
Download
Sony SRG-H40UH Operating Instructions Manual Download Page 30

30

BACKLIGHT

This menu allows you to enable/disable 
backlight compensation so that exposure is 
optimized for backlight. You can choose either 
[ON] or [OFF]. This setting is available when 
[MODE] is [FULL AUTO], [SHUTTER Pri], or [IRIS 
Pri].

SPOTLIGHT

This menu allows you to enable/disable 
spotlight compensation by adjusting the 
exposure darker when a part of the object is 
bright, such as a person’s face in spotlight. You 
can choose either [ON] or [OFF]. This setting is 
available when [MODE] is [FULL AUTO], [SHUTTER 
Pri], or [IRIS Pri]. [SPOTLIGHT] becomes disabled 
when [BACKLIGHT] is [ON].

SLOW SHUTTER

When you set the mode to [ON], the camera 
automatically uses slow shutter speed for 
exposure as the illumination of the object to be 
shot decreases. This menu is available when 
[MODE] is [FULL AUTO] or [IRIS Pri].

COLOR Menu

The COLOR menu is used to adjust the white 
balance and the color.

WHITE BALANCE MODE

Select a white balance mode.
You can choose from [AUTO1], [AUTO2], 
[INDOOR], [OUTDOOR], [ONE PUSH], and 
[MANUAL].

[AUTO1]: 

Automatically adjusts the color to be 

closest to the image you are viewing.

[AUTO2]: 

Automatically adjusts the white 

balance to reproduce the original colors of 
the objects, eliminating the influences of 
ambient illumination.

[INDOOR]:

 Fixes R/B GAIN when the color 

temperature is 3200 K.

[OUTDOOR]:

 Fixes R/B GAIN when the color 

temperature is 5800 K.

[ONE PUSH]:

 White balance is adjusted when the 

ONE PUSH trigger command is received. 
When you operate from the remote 
controller, press the O.P.AWB button on 
RM-IP500 or the ONE PUSH AWB button on 
RM-IP10. Shoot a large white object in the 
center of the screen before adjustment.

 

White balance is adjusted when you press 
the HOME button on the supplied remote 
commander or the joystick top button on 
the remote controller while [ONE PUSH] is 
selected in [WHITE BALANCE MODE] on the 
menu screen.

[MANUAL]:

 Allows you to manually adjust the 

white balance.

When you select any of the above modes, you 
will see available options for the selected mode 
among the following setting items.

SPEED

Adjust the speed at which the camera reaches 
the white convergence point when [AUTO1] or 
[AUTO2] is chosen. Choose a value from [1], [2], 
[3], [4], and [5]. [5] is the fastest and [1] is the 
slowest.

Summary of Contents for SRG-H40UH























































Reviews:

No comments