SRF-V1BT [GB] 4-587-914-
15
(1)
Listening to a preset station
Note
To prevent the preset from being changed by mistake,
do not hold down the preset button.
Presetting stations (5 FM and 5 AM)
Connecting with a BLUETOOTH device
1
Tune to the station you want to preset.
Follow the steps in “Listening to the Radio” above.
2
Press and hold the desired preset button (1–5) until “Stored to [PRESET x].”
appears on the display.
Tips
•
If you try to store another station with the same preset
number, the previously stored station will be replaced.
•
The preset button
3
on the unit has a tactile dot. Use the
tactile dot as a reference when operating the unit.
Example: Presetting a tuned station to the preset button 3
Listening to the Radio
Setting the On Timer
Listening to Music from a BLUETOOTH Device
Hour
Minute
Getting Started
Example: When the preset button 3 is pressed
To DC IN
AC adaptor
(supplied)
The built-in battery will be fully
charged (“
”) in up to 6 hours.
1
Select the “FM” or “AM” function.
2
Select the desired preset station.
1
Turn on the unit, and select the “Bluetooth” function.
1
Turn on the NFC function of
the BLUETOOTH device.
1
Start playback on the
BLUETOOTH device.
2
Select “Bluetooth pairing.”
3
On the BLUETOOTH device, activate the BLUETOOTH function
and perform the pairing procedure.
2
Touch the BLUETOOTH device
to the N-Mark on the unit.
2
Adjust the volume.
Connecting by One-touch (NFC)
Listening to music
If your BLUETOOTH device has an NFC function, this procedure is unnecessary.
See “Connecting by One-touch (NFC)” below.
Turn the
TUNE
dial to select
an option.
Press
ENTER
.
Perform the same procedure
for the following steps.
Using the BLUETOOTH connection, you can listen to music from wirelessly connected
BLUETOOTH devices such as smartphones, tablets, PCs, etc.
When pairing is completed, the BLUETOOTH
device’s name will appear on the display.
For details, refer to the operating instructions supplied with
the BLUETOOTH device.
If you are prompted to enter a passkey, enter “0000.”
Compatible smartphones
NFC-compatible smartphones with
Android™ 4.1 or later installed
NFC
NFC (Near Field Communication) is a technology
enabling short-range wireless communication
between various devices, such as smartphones
and IC tags. Thanks to the NFC function, data
communication – for example, BLUETOOTH
pairing – can be achieved easily by simply
touching NFC-compatible devices together (i.e.,
at the N-Mark symbol or location designated on
each device).
“ ” appears on the display.
The radio turns on at the set time.
To deactivate the timer
Press
ON TIMER
again.
Wall outlet
When setting to the last received station
When selecting from the preset station list
When pairing is completed, the
BLUETOOTH device’s name will
appear on the display.
To terminate the BLUETOOTH
connection
Touch the BLUETOOTH device to the
N-Mark on the unit.
About the BLUETOOTH standby mode
The BLUETOOTH standby mode enables the unit to turn
on automatically by making a BLUETOOTH connection
from a BLUETOOTH device.
See “Setting Menu Options” for details.
Tip
After pressing
FUNCTION
once, you can also select a
function by turning the
TUNE
dial and pressing
ENTER
.
TUNE
dial
Press repeatedly.
You can set the unit to turn on the radio automatically at the set time.
To improve FM/AM radio reception
To adjust the volume
Press repeatedly.
1
Press
SETTINGS
.
2
Select “On timer.”
3
Set the hour and minute.
4
Set the station received at the set time.
5
Activate the timer.
Compatible BLUETOOTH devices
Compatibility requirements for the devices are as follows.
Before using a device with this unit, check that it meets
the requirements.
•
Devices must support A2DP (Advanced Audio
Distribution Profile) and AVRCP (Audio/Video Remote
Control Profile).
•
NFC capability (required only when using the NFC
pairing function of the unit).
1
Connect the unit to a wall outlet and
charge the unit.
Tip
When selecting from the
preset station list, set the
stations first. See “Presetting
stations (5 FM and 5 AM)” for
details.
When using the unit for the first time, make sure to connect the unit to a wall outlet
using the AC adaptor (supplied). Otherwise the unit will not turn on.
ENTER
The unit automatically
switches to the selected
function in about 2
seconds.
Select “SRF-V1BT.” If “SRF-V1BT” does not
appear, perform a search of the device.
To terminate the BLUETOOTH connection
Select the function other than the BLUETOOTH
function.
Press
ENTER
.
Press
ENTER
.
Hour
Minute
Turn the
TUNE
dial to select
an option.
Press
ENTER
.
Perform the same procedure
for the following step.
2
Press
SETTINGS
.
3
Select “Time.”
4
Set the hour and minute.
Tip
You can select the clock display mode,
12-hour clock or 24-hour clock. See “Setting
Menu Options” for details.
Display
Display
Press
ENTER
.
Press
ENTER
.
Press
ENTER
, and
press
SETTINGS
to
exit the setting menu.
1
Extend the antenna for
FM radio reception.
Tips
•
To stop the scanning, press
BACK
.
•
To change the scanning direction,
turn the
TUNE
dial clockwise or
counterclockwise.
Scan tuning
Press
SCAN
to start scanning stations.
Manual tuning
You can manually tune to the desired frequency.
If a receivable station is found,
“[ENTER]:Select” appears on
the display. Press
ENTER
to
receive the station. (If you do
not press
ENTER
within 3
seconds, the search will
restart.)
BACK
2
Turn on the unit, and select the “FM” or “AM” function.
3
Select a desired station.
Tip
The power indicator lights up in green while the unit is turned on.
To set the unit to standby mode, press
again.
Power indicator
First set the clock. See “Getting Started” for details.
Tips
•
The last set volume is stored in the unit’s memory.
•
VOL +
on the unit has a tactile dot. Use the tactile dot as a
reference when operating the unit.
Press
ENTER
.
Press
ENTER
.
Press
ENTER
.
Press
ENTER
.
Press
ENTER
, and
press
SETTINGS
to
exit the setting
menu.
Note
The On Timer function is disabled in off mode.
When the sleep timer is set, “SLEEP” appears
on the display.
The unit enters standby mode automatically
after a set time has elapsed.
Setting the Sleep Timer
Press
SLEEP
repeatedly to select the desired time (in minutes).
ENTER
Tip
BLUETOOTH wireless technology operates
within a range of about 10 m.
When setting in standby mode
Tips
•
The last set time is stored in the unit’s memory.
•
You can check the time left until the unit enters standby mode by pressing
SLEEP
again after
setting the sleep timer.
When using the unit for the first time (if there
is no pairing information in the unit)
The unit will automatically switch to pairing mode. In
this case, proceed to step 3.
When connecting with the second and
subsequent devices
Proceed to step 2.
Press repeatedly.
The unit automatically
switches to the selected
function in about 2
seconds.
Press
SETTINGS
.
Turn the
TUNE
dial to select
an option.
Press
ENTER
.
“Waiting for pairing” appears
on the display.
The last connected
device will be connected
automatically.
If there is pairing information in the unit
FM/AM RADIO
with Bluetooth SPEAKER
Operating Instructions
©2016 Sony Corporation Printed in China
4-587-914-
15
(1)
SRF-V1BT
