Sony SPP-A972 - Cordless Telephone With Answering System Operating Instructions Manual Download Page 47

Page: 47 / 80

Answering Machine Features

Answering Machine Features

Answering Machine Features

Setting up the answering machine

Setting the time and day of the week

Press

(MENU)

repeatedly until

you hear “Set day and time”.

”- -” blinks on the display.

Press

(SELECT)

repeatedly to

select the day of the week.

Press

(TIME/SET)

The day is set and the hour is
announced.

Press

(SELECT)

repeatedly to

select the hour.

Press

(TIME/SET)

The hour is set and the minute is
announced.

Press

(SELECT)

repeatedly to

select the minute.

Press

(TIME/SET)

The day and time you just
entered is announced and the
clock restarts.

Press

(PLAY/STOP)

to exit the

menu setup mode.
You will hear a long
confirmation beep.

Notes

• Press and hold

(SELECT)

to increase the minute setting by 10.

• The time and day are preset to Monday, 12:00 AM.
• “CL” flashes when the day and time is cleared or delayed due to a power

interruption, or when you connect the base unit to the AC outlet for the first
time.

continued

Summary of Contents for SPP-A972 - Cordless Telephone With Answering System

















































































Search results

Summary of Contents for SPP-A972 - Cordless Telephone With Answering System

Reviews:

Related manuals for SPP-A972 - Cordless Telephone With Answering System

Brands by name

Popular brands

Sony SPP-A972 - Cordless Telephone With Answering System, Operating Instructions Manual

Search results

Summary of Contents for SPP-A972 - Cordless Telephone With Answering System

Reviews:

Related manuals for SPP-A972 - Cordless Telephone With Answering System

Brands by name

Popular brands