Sony SO-02L, Instruction Manual

Page: 164 / 263

162 Settings
With Wi-Fi function, you can connect to an
access point for your home, company
network or public wireless LAN services to
use mail and Internet.
■
Reception interference caused by
Bluetooth devices
Wireless LAN (IEEE802.11b/g/n) and the
Bluetooth devices use the same frequency
band (2.4GHz). If you use the terminal near
Bluetooth devices, reception interference
may occur or the communications speed
may lower. Also, you may hear noise or have
a connection problem. Communication
may be interrupted or sound may be lost
when playing back streaming data, etc. In
these cases, do the following:
･
Keep the terminal approximately 10 m or
more away from the Bluetooth device.
･
For using within approximately 10 m, turn
off the Bluetooth device.
Turning on Wi-Fi
1
From the Home screen, [app
folder]
u
[Settings]
u
[Network &
internet].
2
of "Wi-Fi".
･
It may take a few seconds to turn on
the Wi-Fi.
❖
Information
･
Even when Wi-Fi is on, packet communication is
available. When a Wi-Fi network is disconnected, the
connection is automatically switched to the mobile
network. Note that packet communication charge
may be applied if the network connection is kept
switched.
･
Turn the Wi-Fi function to off when you do not use
Wi-Fi to cut battery power consumption.
･
For using Wi-Fi, make sure to receive sufficient signal
strength.
Connecting to a Wi-Fi network
1
From the Home screen, [app
folder]
u
[Settings]
u
[Network &
internet]
u
[Wi-Fi].
2
Select a Wi-Fi network to connect.
･
To connect to a protected Wi-Fi
network, enter the password
u
[CONNECT].
Wi-Fi