32
Before Using the Terminal
2
Pull the tray straight out from the
terminal.
3
With the IC side facing up, place
the docomo nano UIM card on the
tray.
・
Make sure that the cut corner of the
card is oriented properly.
・
Be sure to fit the docomo nano UIM
card into the tray so that it does not
shift.
4
Turn the terminal horizontally and
insert the tray with the card and
press it straight into the slot.
・
Be careful about the direction to insert
of the tray.
5
Firmly press the
parts until the
tray is all the way in, and make
sure that there are no gaps
between the terminal and cover.
T
ray
IC
Corner
cut
T
ray
T
ray
Cover
Summary of Contents for SO-02J
Page 1: ...16 9 INSTRUCTION MANUAL ...