192
Data communication
Turn on Bluetooth function in advance, then
pair with a target Bluetooth device.
Sending data via Bluetooth function
1
[Bluetooth] from the sharing menu
of each application.
2
Tap the other Bluetooth device.
Receiving data
1
Send data from the other
Bluetooth device.
・
appears on the status bar.
2
Drag the status bar downwards
u
[Bluetooth: Incoming file]
u
[ACCEPT].
You can send/receive data to/from a device
with NFC such as a mobile phone.
・
To send/receive data, enable NFC Reader/
Writer, P2P function in advance (P.193).
・
Hold 2 terminals in parallel and place
marks face to face. Do not move them until
sending/receiving is complete.
・
mark location differs depending on
mobile phone.
Check
mark location on each terminal.
・
Operations to send/receive and available data
to send/receive depend on the compatible
applications. Follow the onscreen
instructions.
・
Even if
mark is placed face to face,
sending/receiving may fail. In such case,
operate again to send/receive.
・
The terminal does not communicate with all
NFC devices.
Sending/Receiving data via
Bluetooth function
NFC communication
mark
Summary of Contents for SO-02J
Page 1: ...16 9 INSTRUCTION MANUAL ...