A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Camera Image and Audio — Camera setting Menu
23
Audio bit rate
Select the bit rate when you send the audio from the
built-in microphone or from the
m
microphone input
connectors.
40, 32, 24
or
16
kbps can be selected.
Note
When you have changed the initial audio setting, noise
may occur in the audio on rare occasions. In this case,
the new setting may not be active, so press
OK
button
again to make it active.
Speaker output
Set whether you output the audio which is input to the
audio input connectors of your computer to the speaker
(active speaker for example) connected to the camera
line output connectors by using SNC audio upload tool
included in the supplied CD-ROM.
Select
On
to accept the audio data transmission from
SNC audio upload tool.
OK/Cancel
See “Buttons common to every setting menu” on page
17.
MPEG4 Tab
Frame rate
Set the frame rate of the MPEG image.
Selectable values are 1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25 and
30 fps. The unit is “fps” (frame number sent per a
second).
Bit rate
Set the bit rate of MPEG image transmission for a line.
Selectable values are 64, 128, 256, 384, 512, 768, 1024,
1536 and 2048 kbps.
Notes
• The selected frame rate and bit rate are a tentative
value. The actual frame rate and bit rate may be
different according to the image size, the shooting
scene or the network condition.
• During wireless connection or low band network
connection, noise may occur in the audio on rare
occasions according to the camera image and audio
settings. Set them to the effective values to suit the
network band in use.
Frame rate priority
The frame rate of an image may fall depending on the
network situation. If
On
is selected, the bit rate will be
adjusted so that frame rate does not drop.
Note
The maximum frame rate is the value which is set in
Frame rate
.
OK/Cancel
See “Buttons common to every setting menu” on page
17.
JPEG Tab
Frame rate
Set the maximum frame rate of JPEG image that can be
monitored on the computer. Selectable frame rates are 5,
6, 8, 10, 15, 20, 25 and 30 fps.
Image quality
Set the quality of JPEG image.
Selectable values are from
Level 1
to
Level 5
.
Selecting level 5 gives the image with the highest
quality.
Note
During low band network connection such as a wireless,
noise may occur in the audio on rare occasions
according to the camera image and audio settings. Set
Frame rate
or
Image quality
to suit the network band
in use.
