96
Audio dubbing
Audio dubbing
This feature lets you record over the normal
audio track. The monaural sound previously
recorded is replaced while the original hi-fi
sound remains unchanged. Use this feature
to add commentary to a tape that you have
recorded with a camcorder.
Before you start···
• Open the
t
LIGNE-2 G
o
D jacks cover on the front panel and connect a playback source.
• Turn on the TV and set it to the video channel.
To stop editing
Press
x
(stop) on this VCR and the stereo system (or other VCR).
To listen to both the hi-fi and normal audio
Set MIX AUDIO to OUI in the OPTIONS-1 menu (see page 90). Use this
feature to listen to dubbed audio over the original hi-fi audio. When MIX
AUDIO is set to OUI, the CHOIX SON button does not function.
Remember to reset MIX AUDIO to NON after playing the tape.
Note
• If you eject the tape or turn the VCR off, MIX AUDIO is automatically set to
NON.
1
Insert a source tape into your stereo system (or the playback VCR).
Search for the point to start playback and set it to playback pause.
2
Insert a prerecorded tape with its safety tab in place into this (recording)
VCR. Search for the start of the section to be replaced and press
X
(pause).
The VCR enters pause mode.
3
Press DOUBLAGE SON.
The programme position changes to “L2,” and the indicator appears in
the display window.
4
To start editing, press the
X
(pause) buttons on this VCR and the stereo
system (or other VCR) at the same time.
After you use this feature, the audio in playback mode is automatically
set to monaural.
DOUBLAGE SON
X
t
LIGNE-2 G
o
D
