Sony SLV-SE610K Operating Instructions Manual Download Page 89

Page: 89 / 100

Basic editing

Edi

ting

Basic editing

(when recording on this VCR)

Before you start editing

• Turn on your TV and set it to the video

channel.

• Press INPUT SELECT to display the

connected line in the display window.

• Press SP/LP to select the tape speed, SP or LP.
• On this VCR, set EDIT to ON in the

OPTIONS-1 menu. If the other VCR has a
similar function, turn it on as well.

To stop editing

Press the

(stop) buttons on both VCRs.

Tip

• To cut out unwanted scenes while editing, press

(pause) on this VCR when an

unwanted scene begins. When it ends, press

(pause) again to resume recording.

Note

• If you start editing following the procedure above, the VCR won’t start recording

with the OPC function. To record a tape with the OPC function, press

REC

again during recording pause in step 3 so the VCR analyses the tape. Then, press

(pause) after the OPC indicator stops flashing to start recording. If you press

(pause) before the OPC indicator stops flashing, the OPC function is cancelled.

Insert a source tape with its safety tab removed into the other (playback)
VCR. Search for the point to start playback and set it to playback pause.

Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press

(pause).

Press

REC on this VCR to set it to recording pause.

To start editing, press the

(pause) buttons on both VCRs at the same

time.

REC

Summary of Contents for SLV-SE610K





































































































Search results

Summary of Contents for SLV-SE610K

Reviews:

Related manuals for SLV-SE610K

Brands by name

Popular brands

Sony SLV-SE610K, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE610K

Reviews:

Related manuals for SLV-SE610K

Brands by name

Popular brands