18
Connecting the VCR
Additional connections
To a stereo system
(not available on
SLV-SE610N/K)
You can improve sound
quality by connecting a
stereo system to the
R/D
L/G jacks as shown on the
right.
To a satellite or digital
tuner with Line Through
(not available on
SLV-SE610N/K)
Using the Line Through
function, you can watch
programmes from a satellite
or digital tuner connected to
this VCR on the TV even
when the VCR is turned off.
When you turn on the
satellite or digital tuner, this
VCR automatically sends the
signal from the satellite or digital tuner to the TV without turning itself on.
Note
• You cannot watch programmes on the TV while recording unless you are recording
a satellite or digital programme.
*
1
SLV-SE810N/K only
*
2
SLV-SE710N/K and SX710N/K only
*
3
not available on SLV-SE610N/K
1
Connect the satellite or digital tuner to the DECODER/LINE-3 IN*
1
(or
DECODER/LINE-2 IN*
2
) connector as shown above.
2
Set DECODER/LINE3*
1
(or DECODER/LINE2*
2
) to LINE3*
1
(or
LINE2*
2
) in the OPTIONS-2 menu.
3
Set POWER SAVE to OFF or PARTIAL*
3
in the OPTIONS-2 menu.
4
Turn off the VCR.
To watch a programme, turn on the satellite or digital tuner and the TV.
Audio cable (not supplied)
R/D L/G
LINE IN
: Signal flow
Scart cable (not supplied)
DECODER/
t
LINE-3 IN*
1
or DECODER/
t
LINE-2 IN*
2
LINE OUT
: Signal flow
Summary of Contents for SLV-SE610K
Page 99: ......
