82
Connecting to a VCR or stereo system
Example C
How to connect to a stereo system
(SLV-SE800B only)
Connect the ENTREE LIGNE-2 AUDIO G/D jacks on this VCR to the audio output
jacks on the stereo system, using the RK-C510HG audio cable. (not supplied).
Notes
• Make sure you connect the plugs to jacks of the same colour.*
1
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the ENTREE LIGNE and SORTIE LIGNE jacks of the other
VCR, select the input correctly to prevent a humming noise.
• If the other VCR does not have a PERITEL connector, use the VMC-2106HG cable instead
and connect the cable to the line out jacks of the other VCR.
• When you connect another VCR to the DECODEUR/ENTREE LIGNE-3 *
1
(or
DECODEUR/ENTREE LIGNE-2*
2
) connector, set DECODEUR/LIGNE3*
1
(or
DECODEUR/LIGNE2*
2
) to LIGNE3*
1
(or LIGNE2*
2
) in the OPTIONS-2 menu.
*
1
SLV-SE800B only
*
2
SLV-SE600B, SE700B, and SX700B only
TV
DECODEUR/
t
ENTREE
LIGNE-3
*
1
or
DECODEUR/
t
ENTREE
LIGNE-2
*
2
VMC-2121HG PERITEL cable (not supplied)
PERITEL
: Signal flow
Your VCR (Recorder)
Other VCR (Player)
