Sony SLV-SE440K Operating Instructions Manual Download Page 42

Page: 42 / 88

Recording TV programmes

Recording TV programmes

Before you start...

• Refer to “Index to parts and controls” for button locations.

Turn on your TV and set it to the video channel.

To record from a decoder, turn it on.

If no picture or sound is reproduced on the TV, press

TV/VIDEO on the remote commander to display VIDEO

indicator on the display window.

Insert a tape with its safety tab in place.

• To record a normal channel, press PROG +/– until the programme

position number or station name you want appears in the display
window.

• To record from a decoder or other source connected to one or

more of the LINE inputs, press INPUT SELECT until the
connected line appears in the display window.

Press SP/LP to select the tape speed, SP or LP.

LP (Long Play) provides recording time twice as long as SP.
However, SP (Standard Play) produces better picture and audio
quality.

• PROG

INPUT SELECT

SP / LP

Summary of Contents for SLV-SE440K

























































































Search results

Summary of Contents for SLV-SE440K

Reviews:

Related manuals for SLV-SE440K

Brands by name

Popular brands

Sony SLV-SE440K, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE440K

Reviews:

Related manuals for SLV-SE440K

Brands by name

Popular brands