Sony SLV-SE350K Operating Instructions Manual Download Page 75

Page: 75 / 100

Searching using the index function

Ad
diti

onal

O
p

erati

ons

Searching using the index function

To stop searching

Press

STOP.

Notes

• No index signal will be added when recording starts from recording pause. However, an

index signal will be marked if you change the programme position during recording pause.

• When you press

INDEX SEARCH, if there is nothing recorded before the selected

index signal, playback may not start exactly at the index signal.

The VCR automatically marks the tape with
an index signal at the point where each
recording begins. Use these signals as
references to find a specific recording.

Insert an indexed tape into the VCR.

Press

INDEX SEARCH.

• To search ahead, press

INDEX

SEARCH.

• To search backwards, press

INDEX

SEARCH.

The VCR starts searching, and playback starts
automatically from that point.

INDEX
SEARCH

INDEX

Summary of Contents for SLV-SE350K





































































































Search results

Summary of Contents for SLV-SE350K

Reviews:

Related manuals for SLV-SE350K

Brands by name

Popular brands

Sony SLV-SE350K, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE350K

Reviews:

Related manuals for SLV-SE350K

Brands by name

Popular brands