Sony SLV-SE310D Operating Instructions Manual Download

Page: 43 / 81

Recording TV programmes

sic

perati

ons

Master Page : Right

filename[010BAS.fm] model name1[SLV-SE310D] model name2[SLV-SE510D] [3-065-669-E1 (1)]

Recording TV programmes

Before you start...

• Refer to “Index to parts and controls” for button locations.

To stop recording

Press

STOP.

Turn on your TV and set it to the video channel.

To record from a decoder, turn it on.

Insert a tape with its safety tab in place.

Press PROG +/– to select the programme position or station name
you want to record.

Press SP/LP to select the tape speed, SP or LP.

LP (Long Play) provides recording time twice as long as SP.
However, SP (Standard Play) produces better picture and audio
quality.

Press

REC to start recording.

The recording indicator lights up red in the display window.

• PROG

VIDEO

OPC

SP / LP

VIDEO

OPC

REC

VIDEO

OPC

Recording indicator

continued

Summary of Contents for SLV-SE310D


















































































Search results

Summary of Contents for SLV-SE310D

Reviews:

Related manuals for SLV-SE310D

Brands by name

Popular brands

Sony SLV-SE310D, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE310D

Reviews:

Related manuals for SLV-SE310D

Brands by name

Popular brands