Sony SLV-SE240G Operating Instructions Manual Download Page 53

Page: 53 / 80

Playing/searching at various speeds

ditio

al Op

er
atio

Additional Operations

Playing/searching at various speeds

Before you start

…

• Refer to “Index to parts and controls” for button locations.

Playback options

To resume normal playback

Press

(play).

Using Playback Dial on the
VCR

With Playback Dial, you can
operate the following playback
options.

Do this

View the picture
during fast-forward or
rewind

During fast-forward, hold down

(fast-forward).

During rewind, hold down

(rewind).

Play at high speed

• During playback, briefly press

(fast-forward) or

(rewind). The tape continues to play at high

speed.

• During playback, hold down

(fast-forward) or

(rewind). When you release the button, normal

playback resumes.

Play at twice the
normal speed

During playback, press ×2.

Play in slow motion

During playback, press

SLOW.

Do this

View the picture
during fast-forward or
rewind

During fast-forward, turn and hold Playback Dial to the
right (

(fast-forward)). During rewind, turn and hold

Playback Dial to the left (

(rewind)).

Play at high speed

• During playback, quickly turn and release Playback

Dial to the right (

(fast-forward)) or left (

(rewind)). The tape continues to play at high speed.

• During playback, turn and hold Playback Dial to the

right (

(fast-forward)) or left (

(rewind)).

When you release Playback Dial, normal playback
resumes.

Playback Dial

continued

Summary of Contents for SLV-SE240G

















































































Search results

Summary of Contents for SLV-SE240G

Reviews:

Related manuals for SLV-SE240G

Brands by name

Popular brands

Sony SLV-SE240G, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE240G

Reviews:

Related manuals for SLV-SE240G

Brands by name

Popular brands