20
Setting up the VCR with the Auto Set Up function
To cancel the Auto Set Up function
Press MENU.
Notes
• Whenever you operate the Auto Set Up function, some of the settings
(ShowView*, timer, etc.) will be reset. If this happens, you have to set them again.
• Auto preset starts automatically only when you plug in the mains lead for the first
time after you purchase the VCR.
• If you want to use the Auto Set Up function again, press MENU, then press
M
/
m
/
<
/
,
to highlight INSTALLATION and press OK. Press
M
/
m
to highlight
INSTALLATION AUTO, then repeat all procedures from step 3.
• Auto preset can be performed by pressing
x
(stop) on the VCR continuously for 5
seconds or more with no tape inserted.
* not available on SLV-SE640B
