Sony SLV-SE100K Operating Instructions Manual Download

Page: 9 / 72

Getting

Star

Connecting the VCR

If your TV has a Scart (EURO-AV) connector

Note

• If the TV is connected to the LINE-1 (TV) connector, setting the RF channel to OFF is

recommended. In the OFF position, only the signal from the aerial is output through the
AERIAL OUT connector (see page 13).

Disconnect the aerial cable from your
TV and connect it to AERIAL IN on
the rear panel of the VCR.

Connect AERIAL OUT of the VCR
and the aerial input of your TV using
the supplied aerial cable.

Connect LINE-1 (TV) on the VCR
and the Scart (EURO-AV) connector
on the TV with the optional Scart
cable.

This connection improves picture and
sound quality. Whenever you want to
watch the VCR picture, press

TV/

VIDEO to display the VIDEO
indicator in the display window.

Connect the mains lead to the mains.

Mains lead

LINE-1

(TV)

AERIAL IN

Scart
(EURO-AV)

to mains

Aerial cable (supplied)

AERIAL OUT

Scart cable (not supplied)

AERIAL IN

: Signal flow

ARIAL

ANTNN

NTR

OUT

SORTI

ARIAL

ANTNN

NTR

OUT

SORTI

continued

Summary of Contents for SLV-SE100K









































































Search results

Summary of Contents for SLV-SE100K

Reviews:

Related manuals for SLV-SE100K

Brands by name

Popular brands

Sony SLV-SE100K, Operating Instructions Manual

Search results

Summary of Contents for SLV-SE100K

Reviews:

Related manuals for SLV-SE100K

Brands by name

Popular brands