16
Hookups
Automatic clock setting
Once you’ve set up the VCR, it automatically sets the clock the first time you turn off
the VCR. “ACS” (Auto Clock Set) will flash in the display window and search for a
time signal provided by some TV channels. After that, whenever you turn off the
VCR, it checks the time and adjusts the clock, even for Daylight Saving Time.
If you want to use the timer to record right away, or if the channels in your area do not
carry time signals, set the clock manually. For details, see page 36.
Notes
• If the clock is not set, “ACS” will flash in the display window whenever the VCR is turned
off. During this time, the VCR will search for a time signal.
• To successfully record a program from the digital satellite receiver, proceed as follows:
– Leave the digital satellite receiver on all the time.
– Turn off the display (menu screen, channel number, etc.) of the digital satellite receiver.
– To record or receive locked channels, unlock the channel before the VCR starts recording.
– To set pay-per-view programs in the timer setting, order the pay-per-view program before
the VCR starts recording.
– Some programs are copy protected. You cannot record these programs.
4
The CABLE BOX CONTROL menu appears.
Select ON. For details, see page 39.
5
Enter your digital satellite receiver code
number and press OK. For details, see page
39.
6
Set your digital satellite receiver output channel (BOX OUTPUT CH) to LINE
and press OK.
NEXT
:
SELECT :
OK
SET UP
CABLE BOX CONTROL
EASY SET UP
CANCEL :
CABLE MOUSE
BOX CODE NO.
BOX OUTPUT CH
OFF
ON
NEXT
:
USE
:
OK
0–9
SET UP
CABLE BOX CONTROL
EASY SET UP
CANCEL :
CABLE MOUSE
BOX CODE NO.
BOX OUTPUT CH
ON
CH3
– – –
SET UP
SET UP IS DONE
NEXT
:
SELECT :
OK
SET UP
CABLE BOX CONTROL
EASY SET UP
CANCEL :
CABLE MOUSE
BOX CODE NO.
BOX OUTPUT CH
ON
CH2
LINE
CH4
CH3
Normal display
