Getti
ng Sta
rted
5
Setting up the remote commander
Step 2 : Setting up the remote commander
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove the batteries
to avoid possible damage from battery leakage.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
Inserting the batteries
Insert two size AA (R6) batteries
by matching the + and – on the
batteries to the diagram inside the
battery compartment.
Insert the negative (–) end first,
then push in and down until the
positive (+) end clicks into
position.
Using the remote
commander
You can use this remote
commander to operate this VCR
and a Sony TV. Buttons on the
remote commander marked with a
dot (•) can be used to operate your
Sony TV.
To operate
Set
[TV]
/
[VIDEO]
to
the VCR
[VIDEO]
and point at the remote sensor at the VCR
a Sony TV
[TV]
and point at the remote sensor at the TV
1
2
3
[TV]
/
[VIDEO]
Remote sensor
continued
Summary of Contents for SLV-AX10 - Video Cassette Recorder
Page 83: ......
