138
Making Settings Using a Personal Computer
Setting the isolation function
You can isolate some settings and prevent them from
being recalled.
Settings that are isolated cannot be recalled. However,
when the scene is stored, the current settings are stored
as scene data together with isolation-free settings.
1
Click the [ON] radio button corresponding to each
of the items that you want to isolate from being
recalled.
2
Click the [APPLY] button.
To cancel the operation performed in step
1
Click the [CANCEL] button instead of the
[APPLY] button.
Note
You cannot make the setting involving the isolation
function described above and settings related to a
scene at the same time.
If you execute settings made in the SCENE
ISOLATION column by clicking the [APPLY] button
before executing settings made in the SCENE
SETTING column, settings made in the SCENE
SETTING column are disabled. Also, if you perform
certain actions or settings such as recalling a scene in
the SCENE SETTING column before executing
settings made in the SCENE ISOLATION column by
clicking the [APPLY] button, settings of the isolation
function are disabled.
MIC AMP Page
The MIC AMP page allows you to confirm the
presence of all of the DMBK-S101s inserted into the
SIU-100/100T at the same time. In Edit Mode, you can
made all sorts of settings for the DMBK-S101.
Confirming the presence of all of the
DMBK-S101
Click the [MIC AMP] of Setting in the status display
area.
The MIC PRE AMP INFORMATION window
appears.
Making settings for the DMBK-S101
You can set +48 V ON/OFF, PAD ON/OFF, and the
reference input level for every channel in Edit Mode.
1
Make the required settings.
