126
Making Settings Using a Personal Computer
Design of the TOP Page
When you access the HTTP server of the SIU-100/
100T, the TOP page of View Mode opens.
The following two window modes are available:
• View Mode
Allows you to confirm the current status.
• Edit Mode
Allows you to make various settings.
1
Selection area
From here you can jump to the Routing, Slot Status or
Settings pages. This area is common to all pages.
2
Password text box/Unlock button
By entering a password and clicking the
[Unlock] button in View Mode, the mode changes to
Edit Mode.
3
Setting the automatic update interval
In View Mode, the status display is automatically
updated. You can set the interval for updating the status
display here. In Edit Mode, the status display is not
updated.
4
Status display area
The TOP page opens when you access to the SIU-100/
100T, showing the following informations.
• Name of the current unit
• IP address
• Sync status
• Type of option board inserted
The status depends on the page selected.
To return to the TOP page
Click [SIU-100 System Interface Unit] displayed at the
top right of every page.
In View Mode, the page returns to the TOP page in
View Mode. In Edit Mode, the page returns to the TOP
page in Edit Mode.
To change the automatic update interval
Proceed as follows to change the interval.
1
Click the [
V
] found at the right of the RELOAD
INTERVAL box.
The list of reload intervals appears.
2
Select the desired interval.
3
Click the [APPLY] button.
The status information is updated at the selected
interval.
To reset to the previous setting
Click the [CANCEL] button instead of the
[APPLY] button.
TOP page of View Mode
1
Selection area
2
Password text box/Unlock button
3
Setting the automatic update interval
4
Status display area
