20
Presetting channels
If the picture is not clear
If the picture is not clear, you may use the Manual Fine Tuning (REGL.FIN)
function. After step 7, press
V/v
to select “REGL.FIN”. Press
B/b
to get a clear
picture. Then press ENTER.
Tips
• To set the programme position for the decoder, see “Setting the Canal Plus decoder” on
• The DVD-VCR must receive channel information for station names to appear automatically.
Note
• When adjusting REGL.FIN, the menu may become difficult to read due to interference from
the picture being received.
9
Enter the station name.
1
Press
V/v
to select a character.
Each time you press
V
, the character
changes as shown below.
A
t
B
t
…
t
Z
t
0
t
1
t
…
t
9
t
A
2
Press
b
to set the next character.
The next space flashes.
To correct a character, press
B/b
until the character you want to correct
flashes, then reset it.
You can set up to 4 characters for the station name.
10
Press ENTER to confirm the station name.
11
Press
O
RETURN, then press SET UP to exit the menu.
ENTER
RETURN
ENTER
PR
REGL.FIN
CANAL
DECODEUR
NOM
: 5
SYS.
: L / L’
: NON
RECHERCHE MANUELLE
MEMOIRE :
: 033
: –
: O – – –
V
v
B
b
ENTER
RETURN
SET UP
