![background image](http://html.mh-extra.com/html/sony/shake-6d/shake-6d_operating-instructions-manual_1330190034.webp)
model name [SHAKE-6D]
[4-462-817-
11
(2)] GB
34
GB
filename[D:\NORM'S JOB\SONY HA\SO130043\SHAKE-6D (PMRF
01)\4462817112_GB\070TUN.fm]
masterpage:Left
Listening to the radio
1
Press FUNCTION repeatedly to
select FM or AM band.
2
For automatic scanning:
Hold down /– until the
frequency indication changes and then
release. “AUTO” lights up in the
display panel.
Scanning stops automatically when a
station is tuned in. “TUNED” and
“ST” (for FM stereo programs only)
light up in the display panel.
If “TUNED” does not light up and
scanning does not stop, press
x
to stop
scanning. Then, perform manual
tuning (below).
For manual tuning:
Press /– repeatedly to tune
to the station you want.
For direct tuning:
Press D.TUNING, then press the
numeric buttons to enter the frequency
of the station you want. For example,
press 1, 0, 2, 5 and 0 to enter the
frequency of FM 102.50 MHz.
Press
. If you cannot tune in the
station, make sure you have entered
the right frequency used in your area.
To cancel direct tuning, press
D.TUNING again.
Note
When you tune to an FM station that provides
RDS services, information such as the service
name or station name is provided by broadcasts.
You can check the RDS information by pressing
DISPLAY repeatedly.
Tip
To reduce static noise on a weak FM stereo
station, hold down SHIFT, then press FM
MODE repeatedly until “MONO” lights up in
the display panel.
To change the AM tuning interval
(Except for Saudi Arabian and
Russian models)
The default setting for AM tuning interval
is 9 kHz (or 10 kHz for some areas). You
cannot change the AM tuning interval in
Power Saving Mode.
Use the buttons on the unit to perform this
operation.
1
Press TUNER/BAND repeatedly to
select AM band.
2
Press
"/1
to turn off the system.
3
While holding down
X
, press
"/1
.
“AM 9K STEP” or “AM 10K STEP”
appears in the display panel.
When you change the interval, all the
AM preset stations are erased.
You can store up to 20 FM and 10 AM
stations as your favorite stations.
1
Tune to the station you want.
2
Press DVD/TUNER MENU.
3
Press
/
repeatedly to select
the preset number you want,
then press
.
“COMPLETE” appears in the display
panel. The station is stored.
To tune to a preset station
Press /– repeatedly to select the
preset number you want.
You can also press the numeric buttons,
then press
to select a preset station.
Tuner
Presetting radio stations
Preset number