SELP1650 (E 3.5-5.6/PZ 16-50 OSS) (E PZ 16-50mm F3.5-5.6 OSS)
2-5
2. Engage the three projections of the 3rd Lens Assy with the three grooves of the 2nd Lens Assy.
Note:
Do not fully insert the 3rd Lens Assy and hold it in the state where the connector can be seen as shown below.
2nd Lens Assy
2nd Lens Assy
3rd Lens Assy
Projection
Projections
Groove
Grooves
Connector
3rd Lens Assy
3. Align the gear right end of the Zoom Cam Tube with the connector and engage the six projections of the 2nd Lens Assy and the 3rd Lens Assy
with the six inner grooves of the Zoom Cam Tube.
Note 1:
Do not fully insert the 2nd Lens Assy and the 3rd Lens Assy into the Zoom Cam Tube and hold them in the state where the projections come to the posi-
tions shown below.
Note 2:
Do not catch the flexible board.
Connector
Connector
2nd Lens Assy,
3rd Lens Assy
2nd Lens Assy,
3rd Lens Assy
Fixed Ring,
Zoom Cam Tube
Gear right end
(eyepiece side)
Fixed Ring,
Zoom Cam Tube
Flexible board
Inner grooves
Inner grooves
Inner grooves
Projections
Projections
Projections
Projections
4. Match the two convexes of the 2nd Lens Assy with the two concaves of the 1st Lens Assy, and then insert the three projections of the 2nd Lens
Assy into the three grooves of the 1st Lens Assy (arrow
1
) while maintaining the state of the 2nd Lens Assy, 3rd Lens Assy, Fixed Ring, and
Zoom Cam Tube shown below.
5. When the 2nd Lens Assy is fully inserted into the 1st Lens Assy, the three projections of the 1st Lens Assy are inserted into the three groove inlets
of the Zoom Cam Tube (arrow
2
).
Turn the Zoom Cam Tube in the direction of the arrow to the position where the projection of the 1st Lens Assy comes to the U turn of the groove
of the Zoom Cam Tube, and maintain the state.
1st Lens Assy
1st Lens Assy
1st Lens Assy
Groove
Zoom Cam Tube
U turn of the groove
Groove
Groove
2nd Lens Assy,
3rd Lens Assy,
Fixed Ring,
Zoom Cam Tube
Groove inlets
2nd Lens Assy
Convexes
Concaves
2nd Lens Assy
Projections
Projections
Projection
Eyepiece side
Object side
1
2
6. Set the cabinet number position of the Fixed Ring at the gear end of the Zoom Cam Tube to pass the three projections of the 2nd Lens Assy through
the holes of the Fixed Ring.
Fixed Ring
Cabinet number
Gear end of the Zoom Cam Tube
Hole of the Fixed Ring
Hole of the Fixed Ring
Projections of the 2nd Lens Assy
Hole of the
Fixed Ring
