25
Chapter 2 Installation
Installing the S-AIT Tape Drive Unit
The S-AIT Tape Drive Unit weights about 7 kg (15.4 lb.) and has the following
dimensions. Make sure that the surface where you will install the S-AIT Tape
Drive Unit is appropriate before installing the unit.
Note
Install the S-AIT Tape Drive Unit on a horizontal surface near an AC power
outlet. Make sure that you leave gap of about 150 mm (5.9 in.) behind the rear
of the unit to allow air to circulate.
Recommended positioning of the unit
• Always position the unit horizontally.
• Away from moving air, such as fans, open windows, or air conditioners.
• Away from devices such as facsimiles to avoid toner and paper dust.
The S-AIT Tape Drive Unit should not be stacked. Do not place anything on top
of the unit.
86 mm (3.4 in.)
372 mm (14.6 in.)
210 mm
(8.3 in.)
50 mm (2.0 in.)
210 mm (8.3 in.)
150 mm
(5.9 in.)
372 mm (14.6 in.)
50 mm (2.0 in.)
Rear
Front
Summary of Contents for SDZ-S100
Page 62: ...62 ...
Page 63: ......
Page 64: ...Printed in Japan For information about the S AIT Tape Drive Unit contact your reseller ...
