9
POWER
1
6
Part 1. Introduction
7
2
3
4
5
Part Names and Functions
Front panel
Figure 1-2. Front panel
1
AIT Data Cartridge Receptacle
See page 14 for information on inserting and removing a AIT data
cartridge.
2
POWER Indicator
Lights while the drive is on.
3
BUSY Indicator
Lights when data is being transferred through the SCSI interface. This
indicator also lights under the following conditions:
Drive is reading or writing
repeated blinking (same on-off
normally:
interval).
4
TAPE Indicator
When a AIT cartridge is installed, this indicator lights. This also lights
under the following conditions:
Inserting and removing
repeated blinking (same on-off
a cartridge:
interval).
Cartridge deteriorated:
alternating long-short blinking.