63
Maintenance
Chapt
er 1 Us
e
r Guid
e
Security (Role Restricted)
System Security is designed to protect the DCP Packages
from unauthorized access to content and any potential for
duplication in an unencoded form. When the security of
the Auditorium Unit has been breached or a tamper switch
failure is detected, presentation is halted and cannot be
resumed until Security has been initialized. In addition, the
STATUS Alert is set RED, the MESSAGE Alert is set
RED, and a Security Alert Message is generated and
written to the Alert Message Log.
To view the Alert Message, tap STATUS and then tap the
MESSAGE Alert icon. The ALERT MESSAGES pane
appears and is shown below.
Tap Scroll Up
or Scroll Down
the locate the ALert
Message of interest. To insure that the latest Alert
Messages are present in the list, tap
Refresh
.
To access the Security
pane, tap
Menu
, tap
Maintenance
and then
tap
Security
. The
Security pane appears.
It may take some minutes
for the Security Services
to come to a ready state
following initial
application or restoration
of system power.
When the Auditorium
Unit’s CSS (Cavity
Security System) has
been breached the Security indicator is illuminated. While
all users can view the Security pane (illustrated below), the
ability to initialize the system security
1
is restricted to an
authorized user. This is done to insure that only
responsible persons can access the interior of the
Auditorium Unit and then resume the Content Element
decrypting and presentation process.
STATUS Alert
Message Alert Icon
ALERT MESSAGE List
Refresh
Note
1.Confirm the state where no unauthorized acquisition of
content or other modification was made before initializing.
Tap Security
Maintenance Menu
Summary of Contents for Screen Management System
Page 81: ...Sony Corporation ...
