Sony SCD SCD-C2000ES, Operating Instructions Manual

Page: 10 / 60

10 US
7
Press N .
Playback starts from the first track. If you
want to start playing from a specific track,
turn
l
AMS
L
(or press
./>
on the remote repeatedly) to select the track
number before pressing
N .
8
Adjust the volume on the amplifier.
Basic operations during play
Note
During playback, increase the volume level gradually
starting from the lowest level. The output from this
player may contain band width that is out of the normal
listening range. This may cause damage to the speakers
or ears.
To locate a track directly by
entering the track number
Press the numeric button(s) on the remote
to enter the track number.
To enter a track number 11 or over
1
Press >10 on the remote.
2
Enter the corresponding digits.
To enter 0, press 10/0 on the remote instead.
Example:
To play track number 30, press >10, then 3 and 10/0.
To play track number 100, press >10 twice, then 1, and
10/0 twice.
Selecting the playback layer
When playing a hybrid disc with an SA-CD
layer and a CD layer (page 5), you can select the
layer you want to listen to. Also, since both
layers are on one side, it is not necessary to turn
the disc over. The factory setting is “SEL SA–
CD” (SA-CD layer).
Press SA-CD/CD to select the desired
playback layer.
To select the default playback
layer
1
Press MENU on the player.
2
Turn l AMS L (or press ./>
on the remote repeatedly) until “LAYER
SEL” appears in the display.
3
Press l AMS L (or ENTER on the
remote).
The current default layer appears.
4
Turn l AMS L (or press ./>
on the remote) to select the desired
playback layer.
5
Press l AMS L (or ENTER on the
remote).
Selecting the playback area
When playing a disc with the 2 channel playback
area and the multi-channel playback area
(page 5), you can select the playback area you
want to listen to.
Press MULTI/2CH to select the desired
playback area.
To select the default playback
area
1
Press MENU on the player.
2
Turn l AMS L (or press ./>
on the remote repeatedly) until “M/2ch
SEL” appears in the display.
3
Press l AMS L (or ENTER on the
remote).
The current default area appears.
To Do the following:
Stop play Press x .
Pause play Press X .
Resume play
after pausing Press X or N .
Select a track Turn
l
AMS
L
(or press
./>
on the remote
repeatedly).
Select a disc Press DISC SKIP (or DISC SKIP
+/– on the remote) repeatedly.
Select a disc
directly Press DISC 1-5 on the player.
When using the remote, follow the
procedure below.
1
Press DISC.
2
Press the corresponding
numeric button for the disc.
3
Press ENTER.
Eject a disc Press A OPEN/CLOSE on the
player.