reconnection attempts. When this happens, you can use any key to force the
accessory to try reconnecting, or you can use NFC to reconnect the two devices.
To force the headset to try reconnecting
1
Android™ device: Make sure that the Bluetooth® function is turned on.
2
Press any key on the headset.
To reconnect your headset using NFC
1
Android™ device:
Make sure that the NFC function is turned on and that the
screen is active and unlocked.
2
Place the Android™ device over your headset so that the NFC detection area
of each device touches the other.
Restarting and resetting the headset
You can force your headset to shut down in situations where it stops responding or
won't restart normally. No information about paired devices gets deleted. You can
also reset your headset to its original factory settings, which deletes all information
about paired devices.
To force the headset to shut down
•
Press and hold down the power key for at least 6 seconds.
To reset the headset
1
Turn off the headset, then connect the charger so that the headset starts to
charge.
2
Press and hold down
until the headset vibrates briefly.
Wearing instruction
To get the best performance from your headset when using it outdoors, it is
recommended that you carry the device that you have paired with the headset on the
same side of your body as the antenna of the headset unit.
6
This is an Internet version of this publication. © Print only for private use.
