44
US
[ERROR NO LINK Lch] or [ERROR NO LINK Rch] appears in the display
window.
• Turn off the Speaker System. After unplugging the AC power cords (mains leads) for speaker A and
speaker B, firmly plug in the digital sync cable.
• Turn off the Speaker System, and then firmly plug in the AC power cord (mains lead) for speaker B.
[OVER] appears in the display window.
• The Speaker System is in protect mode. We recommend lowering the volume in such cases. When
you lower the volume, the display turns off.
Nothing appears in the display window.
• Press the DIMMER button on the remote control to adjust the brightness. (page 15)
Sound
No sound is output from the speakers.
Check the following to see if the speakers are the cause.
• Check the volume level, or cancel muting (page 14).
• Check if the proper input jack is selected.
• Check if the Speaker System and connected devices are on.
• Check if the Speaker System supports the input audio format. For details about supported formats,
see “Specifications” (page 46).
Check the following to see if the computer you are using is the cause.
• When connecting the computer (Windows) to the speaker’s USB-B port, check if the dedicated
driver is installed on the computer you are using (page 25).
• Check if the volume level of the OS or playback software is set correctly or if it is set to the muting
status.
• If multiple playback software is running, sound may not be output. Only start the playback
software that you want to use for playback.
• Change the settings for your OS and your playback software.
Multi-channel sources (files) cannot be played.
• The Speaker System supports only 2-channel audio sources (files).
