SERVICE MANUAL
SPEAKER SYSTEM
US Model
E Model
Australian Model
SA-WSLF10/
SS-CTL10/TSL10/TSL11
SPECIFICATIONS
9-879-563-02
2006H05-1
© 2006.08
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
– Continued on next page –
•
SA-WSLF10 is the subwoofer in DAV-LF10.
•
SS-CTL10 is the center speaker in DAV-LF10.
•
SS-TSL10 is the front speaker in DAV-LF10.
•
SS-TSL11 is the surround speaker in DAV-LF10.
This system incorporates with Dolby* Digital and Dolby Pro Logic (II)
adaptive matrix surround decoder and the DTS** Digital Surround
System.
* Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of
Dolby Laboratories.
**Manufactured under license from Digital Theater Systems, Inc.
“DTS”, “DTS-ES”, and “DTS Digital Surround” are trademarks of
Digital Theater Systems, Inc.
Tuner section SA-WSLF10
System
PLL quartz-locked digital
synthesizer system
FM tuner section
Tuning range
North American models:
87.5 – 108.0 MHz
(100 kHz step)
Other models:
87.5 – 108.0 MHz
(50 kHz step)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
North American models:
530 – 1,710 kHz (with the
interval set at 10 kHz)
531 – 1,710 kHz (with the
interval set at 9 kHz)
Other models:
530 – 1,710 kHz (with the
interval set at 10 kHz)
531 – 1,602 kHz (with the
interval set at 9 kHz)
Antenna (aerial)
AM loop antenna (aerial)
Intermediate frequency
450 kHz
Video section SA-WSLF10
Outputs
Video: 1 Vp-p 75 ohms
S video:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
P
B
/C
B
, P
R
/C
R
: 0.7 Vp-p
75 ohms
Inputs
Video: 1 Vp-p 75 ohms
Speakers
Fro
For the US model
nt SS-TSL10
Speaker system
Two-way bass reflex,
magnetically shielded
Speaker unit
50 mm (2 inches) dia. cone
type
×
2, 25 mm (1 inch)
dia. balance-dome-type
tweeter
Rated impedance
4 ohms
Dimensions (approx.)
68
×
380
×
53 mm (2
3
/
4
×
15
×
2
1
/
8
inches) (w/h/d)
220
×
(398 – 530)
×
220
mm (8
3
/
4
×
(15
3
/
4
– 20
7
/
8
)
×
8
3
/
4
inches) (w/h/d) with
stand
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
With 4 ohm loads, both
channels driven, from
200 – 20,000 Hz; rated
65 watts per channel
minimum RMS power,
with no more than 0.7 %
total harmonic distortion
from 250 milli watts to
rated output.
Amplifier section SA-WSLF10
Stereo mode (rated)
86 W + 86 W (4 ohms at
1 kHz, THD 10 %)
Surround mode (reference) music power output
Front:
86
W (each)
(with SS-TSL10)
Center*:
86
W
(with SS-CTL10)
Surround*:
86
W
(with SS-TSL11)
Subwoofer*:
85
W
×
2
(with SA-WSLF10)
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs
VIDEO/SAT:
Sensitivity: 300 mV
Impedance: 50 kilohms
Phones
Accepts low-and high-
impedance headphones.
SA-WSLF10
SS-CTL10
SS-TSL10 SS-TSL11 STAND ASSY
