SA-WD200
US Model
Canadian Model
AEP Model
UK Model
E Model
SERVICE MANUAL
ACTIVE SUBWOOFER
Sony Corporation
Home Audio Company
Shinagawa Tec Service Manual Production Group
9-873-218-01
2001G1600-1
© 2001.7
Ver 1.0 2001. 07
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 3 ohm loads, from 22 – 200 Hz; rated 250 watts,
minimum RMS power, with no more than 0.8 % total
harmonic distortion from 250 milliwatts to rated
output.
System
Type
Active Subwoofer
Speaker unit
Woofer: 13.5 cm dia. (5
3
/
8
in.), cone type
Continuous RMS output
US, Canadian model (0.8%) : 250 W
AEP, UK model (DIN) : 250 W
Other models (0.8%) : 250 W
Reproduction frequency range
22 Hz – 200 Hz
High frequency cut-off frequency
50 Hz – 200 Hz
Phase selector
NORMAL, REVERSE
Inputs
Input jacks
LINE IN: input pin jack
SPEAKER IN: input terminals (ELP plug 6P)
Output jacks
LINE OUT: output pin jack
SPEAKER OUT: output terminals
General
Power requirements
US, Canadian model : 120 V AC, 60 Hz
AEP, UK model : 220 - 230 V AC, 50/60 Hz
Other models : 110 - 120, 220 - 240 V AC, 50/60 Hz
Power consumption
50 W
1 W (Standby mode)
Dimensions
Approx. 165
×
450
×
425 mm
(w/h/d) (6
1
/
2
×
17
3
/
4
×
16
3
/
4
in.)
Mass
16 kg (35 lb 4 oz)
Supplied accessories
Audio connecting cord
(1 phono plug – 1 phono plug) (1)
Speaker cords (1)
Design and specifications are subject to change without
notice.
