background image

SERVICE MANUAL

Sony Corporation

Published by Sony EMCS (Malaysia) PG Tec

US Model

Canadian Model 

E Model

Australian Model

SA-WCT290

AEP Model

UK Model

SA-WCT290/WCT291

SA-WCT290/WCT291

ACTIVE SUBWOOFER

9-890-686-01

2017B80-1

© 

2017.02

Ver. 1.0  2017.02

•  SA-WCT290/WCT291 is the active subwoofer in HT-CT290/CT291.
•  All the units included in the HT-CT290/CT291 (SA-CT290/CT291, SA-

WCT290/WCT291, remote control) are required to con

fi

 rm the opera-

tion of SA-CT290/CT291. Check in advance that you have all the units.

•  For the TEST MODE for this unit, refer to the service manual of HT-CT290/CT291.

SPECIFICATIONS

Subwoofer (SA-WCT290/
SA-WCT291)

CH models:

POWER OUTPUT
 

 50 W (at 4 ohms, 100 Hz)

Other models:

POWER OUTPUT (reference)
 

100 W (per channel at 4 ohms,

 100 

Hz)

Speaker system
 

Subwoofer system, Bass reflex

Speaker
 

130 mm (5

1

/

in) cone type

Power requirements
 

US, CND models:

 

120 V AC, 60 Hz

 LA9 

models:

 

110 V – 240 V AC, 50/60 Hz

 EA 

models:

 

127 V – 240 V AC, 50/60 Hz

 Other 

models: 

 

220 V – 240 V AC, 50/60 Hz

Power consumption
 On: 

15 

W

 

Standby: 0.5 W or less

Dimensions (w/h/d) (approx.)
 

170 mm × 342 mm × 362 mm

 (6

3

/

4

 in × 13

1

/

2

 in × 14

3

/

8

 in)

 (vertical 

installation)

 

342 mm × 172 mm × 362 mm

 (13

1

/

2

 in × 6

7

/

8

 in × 14

3

/

8

 in)

 (horizontal 

installation)

Mass (approx.)
 

6.3 kg (13 Ib 15 oz)

Wireless transmitter/
receiver section

Frequency band
 

2.4 GHz (2.4000 GHz – 2.4835 GHz) 

Modulation method
 

 FHSS (Freq Hopping Spread Spectrum)

Design and specifications are subject to change without 
notice.

Copyrights and Trademarks

•  This system incorporates Dolby* Digital.
  *   Manufactured under license from Dolby Laboratories. 

Dolby, Dolby Audio, and the double-D symbol are 
trademarks of Dolby Laboratories.

•  

The 

BLUETOOTH

®

 word mark and logos are registered 

trademarks owned by Bluetooth SIG, Inc. and any use of 
such marks by Sony Corporation is under license. Other 
trademarks and trade names are those of their respective 
owners.

•  This system incorporates High-De

fi

 nition Multimedia Inter-

face (HDMI™) technology.

  The terms HDMI and HDMI High-De

fi

 nition  Multimedia 

Interface, and the HDMI Logo are trademarks or registered 
trademarks of HDMI Licensing, LLC in the United States 
and other countries.

•  “BRAVIA” is a trademark of Sony Corporation.
•  “PlayStation” is a registered trademark of Sony Computer 

Entertainment Inc.

•  MPEG Layer-3 audio coding technology and patents 

licensed from Fraunhofer IIS and Thomson.

•  Windows Media is either a registered trademark or trademark 

of Microsoft Corporation in the United States and/or other 
countries.

•  This product is protected by certain intellectual property 

rights of Microsoft Corporation. Use or distribution of such 
technology outside of this product is prohibited without a 
license from Microsoft or an authorized Microsoft subsidiary.

•  “Cle” is a trademark of Sony Corporation.
•  Other system and product names are generally trademarks or 

registered trademarks of the manufacturers. ™ and ® marks 
are not indicated in this document.

Photo: SA-WCT290 (Black) Photo: SA-WCT290 (White) / 

 SA-WCT291

jomi

Summary of Contents for SA-WCT290

























Reviews: