background image

SERVICE MANUAL

Sony Corporation

Published by Sony Techno Create Corporation

SA-WCT180

ACTIVE SUBWOOFER

9-896-126-02

2015E33-1

© 

2015.05

US Model

Canadian Model

AEP Model

UK Model

E Model

Australian Model

Chinese Model

Ver. 1.1  2015.05

•  SA-WCT180 is the active subwoofer in HT-CT180.
•  All of the units included in the HT-CT180 (SA-WCT180/

SA-CT180/Remote control) are required to con

fi

 rming op-

eration of SA-WCT180. Check in advance that you have 
all of the units.

•  For the TEST MODE for this unit, refer to the service manual of HT-CT180.

SPECIFICATIONS

POWER OUTPUT (reference)

5
45 W (per channel at 4 ohms, 100 Hz) (Chinese model)

0 W (per channel at 4 ohms, 100 Hz) (Except Chinese model)

Speaker system

Subwoofer system, Bass reflex

Speaker

130 mm (5

1

/

8

in) cone type

Power requirements

120 V AC, 60 Hz (US and Canadian models)

Power consumption

On: 13 W
Standby mode: 0.5 W or less

Dimensions (approx.) (w/h/d)

170 mm × 342 mm × 325 mm
(6

3

/

4

in × 13

1

/

2

in × 12

7

/

8

in)

Mass (approx.)

5.5 kg  (12 Ib  2 oz)

Frequency band

2.4 GHz band (2.404 GHz - 2.476 GHz)

Modulation method

GFSK

Design and specifications are subject to 
change without notice.

Wireless receiver

220 V - 240 V AC, 50 Hz/60 Hz (AEP, UK, Indian, Singapore, 
Argentina, Thai, Australian and Chinese models)

110 V - 240 V AC, 50 Hz/60 Hz (Latin American model 
(Except Argentina))

Note:

Be sure to keep your PC used for service and 
checking of this unit always updated with the 
latest version of your anti-virus software.
In case a virus affected unit was found during 
service, contact your Service Headquarters. 

Summary of Contents for SA-WCT180

























Reviews: