SERVICE MANUAL
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
SA-WA10R
SPECIFICATIONS
WIRELESS SPEAKER SYSTEM
9-889-586-01
2009G05-1
©
2009.07
US Model
• SA-WA10R is the subwoofer in AIR-SW10Ti.
• When the operation of the ATS-SW10Ti or SA-
WA10R is con
fi
rmed, it is necessary to communi-
cate the set of both and con
fi
rm.
Con
fi
rm that all units included in AIR-SW10Ti are
prepared beforehand when you repair.
• “S-AIR” and its logo are trademarks of Sony Corporation.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
• iPhone is a trademark of Apple Inc.
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is
under license. Other trademarks and trade names are those of their respective owners.
• All other trademarks and registered trademarks are of their respective holders. In this manual, ™ and
®
marks are not speci
fi
ed.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(The United States model only)
With 6 ohm loads, from 50 – 120 Hz; rated 50 watts minimum
RMS power, with no more than 10% total harmonic distortion.
Amplifier section
DIN power output (rated):
40 watts (6 ohms at 60 Hz, DIN)
Continuous RMS power output (reference):
50 watts (6 ohms at 60 Hz, 10% THD)
Speaker
Speaker system:
Woofer, 100 mm, cone type, bass-reflex
Rated impedance:
6 ohms
General
Power requirements:
120V AC, 60Hz
Power consumption:
17 watts
Dimensions (w/h/d):
Approx. 123 × 282 × 375 mm
Mass:
Approx. 4.3 kg
Design and specifications are subject to change without notice.
• JIG
When disassembling the set, use the fol-
lowing jig (for speaker removal).
Part No. J-2501-238-A JIG FOR SPEAK-
ER REMOVAL
Summary of Contents for SA-WA10R - Wireless Speaker System Component
Page 8: ...SA WA10R 8 MEMO ...
