10
GB
– When the remote control will not be used for a
long period of time, remove the battery from the
remote control to prevent leaking and corrosion.
– Incorrectly inserting, shorting, dismantling, or
heating the battery, or throwing it into a fire
may cause the battery to rupture or leak.
Turning the photo frame
on
Turning on the power
Press
1
(on/standby) on the photo frame to
turn on the power. The standby indicator turns
to green from red
.
The Sony logo on the front
panel lights up.
Using the remote control
You can turn on/off the photo frame with the
1
(on/standby) button on the remote control.
When using the photo frame
with the built-in battery pack
Turn on the photo frame with the
1
(standby)
button on the photo frame.
If the photo frame is powered only by the built-
in battery pack, the
1
(standby) button on the
remote control does not operate.
Turning off the power
Hold
1
(on/standby) on the photo frame until
the power turns off. The standby indicator turns
to red from green
.
Note
Do not turn the photo frame off or disconnect the AC
adaptor from an AC outlet or the photo frame. Doing
so may damage the photo frame.
Summary of Contents for S-Frame DPF-D830
Page 54: ...Sony Corporation ...