38
Default Operating States
Remote Control Messages
Printing...
This message appears when images are being printed.
Error opening SCSI card or printer off or printer
SCSI ID not 1
This message appears when there is a problem with the
SCSI interface and/or when the printer is off.
1-Grab 2-Print
3-Burn 0-Exit
This is the main screen of the remote control. Press the
[1] key to grab images from the video device. Press the
[2] key to print images, press the [3] key to write
images to a CD-R disc, and press the [0] key to
conclude the patient examination.
Converting image...
This message appears when you capture images with
the UPA-P100MD. It means that the data being
captured is being converted to TIFF format.
Burning a CD
This message appears when the UPA-P100MD is
writing images to a CD-R disc.
An error occurred writing a CD
This message appears when an error occurred when
writing images to a CD-R disc.
Enter Doctors name:
This message appears when you need to enter the
doctor's name, directly or by pressing a function key
on the remote control unit.
Specifications
This section contains the hardware specifications of
the device.
Display
Controller
Keyboard
Display Type
Display Field
Display Area
Character Size
Displayable
Character Type
Cursor
STN-type LCD
20 characters
×
4 lines
57.55
×
17.15 mm
2.45
×
3.95 mm
Alphanumerical (165)
Numerical input: blinking block
Uppercase input: underscore
Lowercase input: superimposed
blinking block and underscore
MPU
Memory
8-bit CMOS microprocessor
RAM
32-KB CMOS RAM
(24 KB for display buffer)
ROM
32-KB CMOS PROM
256-byte CMOS EEPROM
Keyboard
Keys
28 input keys
(8 function keys that can be
programmed with up to 16
characters each)
Operating State
Communication Speed
Code
Parity
STOP
Xon/Xoff
Local Echo
ESC key function
Set H-Tab Stop
CR operation
Shift operation
Auto Repeat
CS
DSR
Default
9600 bps
JIS8
None
1 bit
Disabled
Disabled
Standard
1
CR
Simultaneous
No
Yes
Yes
