Sony RM-P110, User Manual

Page: 28 / 39

28
Pin Assignments
Control signals are available at the parallel port of the
UPA-P100MD, making it possible to design a
customized external control device. Refer to the
illustrations and chart below for the pin assignments.
Parallel Port Pin Assignments
25 14
13 1
Female connector on the rear panel of the UPA-P100MD
pin10 BURN
pin11 EXIT
pin12 PRINT
pin13 GRAB
pin18,19,20,21,22,23,
24,25 GND
GRAB PRINT BURN EXIT
Pin number Signal
1 STROBE (Not supported by the unit at this time)
2 DATA0 (Not supported by the unit at this time)
3 DATA1 (Not supported by the unit at this time)
4 DATA2 (Not supported by the unit at this time)
5 DATA3 (Not supported by the unit at this time)
6 DATA4 (Not supported by the unit at this time)
7 DATA5 (Not supported by the unit at this time)
8 DATA6 (Not supported by the unit at this time)
9 DATA7 (Not supported by the unit at this time)
10 ACK# (BURN)
11 BUSY (EXIT)
12 PE (PRINT)
13 SELECT (GRAB)
14 AUTOFEED# (Not supported by the unit at this time)
15 ERR# (Not supported by the unit at this time)
16 INIT# (Not supported by the unit at this time)
17 SLIN# (Not supported by the unit at this time)
18 GND
19 GND
20 GND
21 GND
22 GND
23 GND
24 GND
25 GND