[32] How to use
Changing the Settings
Shooting settings
Loop recording time
Set the limit of the loop recording time.
1. Press the MENU button.
The list of setting items is displayed.
2. Press the UP button or DOWN button to select
(Loop recording settings) -
(Loop
recording interval) and press the REC/ENTER button.
3. Press the UP button or DOWN button to select the following setting, then press the REC/ENTER
button.
:
Set the limit of the loop recording time about 5 minutes.
:
Set the limit of the loop recording time about 20 minutes.
:
Set the limit of the loop recording time about 60 minutes.
:
Set the limit of the loop recording time about 120 minutes.
:
Does not set the limit of the loop recording time.
[33] How to use
Changing the Settings
Connecting devices settings
Time Code/User Bit
You can use the time code/user bit function when the shooting mode is set to the movie mode and the
movie record format is set to XAVC S.
1. Press the MENU button.
The list of setting items is displayed.
2. Press the UP button or DOWN button to select
(Connecting devices settings) or
(Time
Code/User Bit) and press the REC/ENTER button.
3. Press the UP button or DOWN button to select the setting, then press the REC/ENTER button.
:
Presets the time code.
:
Presets the user bit.
TC FORMAT:
Selects the time code recording method.
TC RUN:
Sets how the time code advances.
TC MAKE:
Sets to record the newly set-up time code on recording media or sets to record the new
time code sequentially from the last time code on recording media.
UB TIME REC:
Sets whether to record the time as a user bit.
