19
Oper
ating
ALL OFF button
To turn off all the
components at one time
If you press the ALL OFF button, all
controlling components turn off .
Some components may not turn off by
pressing the button. In this case, press the
SYNC-UP button to synchronize with the
power on/off status of the components.
For details, see “To synchronize with the
status of a component” on page 18.
Locking the controls
– Hold function
To prevent accidental operation, you can
lock all the buttons with the Hold
function.
While pressing the LIGHT button,
press the SYNC-UP button.
A message reminding you to release the
Hold function appears for 10 seconds on
the screen.
When the controls are locked
If you attempt to operate the Remote
Commander, a message reminding you
to release the Hold function appears for
10 seconds on the screen.
Release Lock
Press LIGHT+SYNC-UP
To unlock the controls
While pressing the LIGHT button, press
the SYNC-UP button.
