15
US
Narrows the dynamic range of the sound track. Useful for
watching movies at low volume late at night.
1
Press AMP MENU.
2
Press
x
/
X
repeatedly until “CUSTOMIZE” appears,
then press ENTER or
c
.
3
Press
x
/
X
repeatedly until “AUDIO DRC” appears,
then press ENTER or
c
.
4
Press
x
/
X
to select the setting.
• DRC OFF : no compression of dynamic range.
• DRC STD : reproduces the sound track with the kind of
dynamic range that the recording engineer intended.
• DRC MAX : compresses dynamic range fully.
5
Press ENTER or AMP MENU.
The AMP menu turns off.
• AUDIO DRC only applies to Dolby Digital sources.
You can enjoy multiplex broadcast sound when the system
receives an AC-3 multiplex broadcast signal.
• To receive AC-3 signal, you need to connect a digital satellite tuner
to the system with an optical cable or coaxial cable, and set the
digital output mode of the digital satellite tuner to AC-3.
1
Press AMP MENU.
2
Press
x
/
X
repeatedly until “CUSTOMIZE” appears,
then press ENTER or
c
.
3
Press
x
/
X
repeatedly until
“DUAL MONO”
appears, then press ENTER or
c
.
4
Press
x
/
X
to select the sound you want.
• MAIN: plays back only the main channel.
• SUB: plays back only the sub channel.
• MAIN+SUB: mixed playback of the main and sub
channels.
• MAIN/SUB: main sound is output from the left speaker
and sub sound is output from the right speaker.
5
Press ENTER or AMP MENU.
The AMP menu turns off.
Enjoying the sound at low volume
(AUDIO DRC)
Note
H
X
M
m
.
>
-
ENTER
CLEAR
x
O
AMP MENU
X/x/c
ENTER
Enjoying Multiplex Broadcast
Sound
(DUAL MONO)
Note
H
X
M
m
.
>
-
ENTER
CLEAR
x
O
AMP MENU
X/x/c
ENTER
