Reader™ User Guide
Search
Getting started
Basic Operations
Adding/Getting Content
Browsing Content Lists
Reading
Organizing
Other Applications
Settings
Other Information
Contents list
Top page
>
Other Information
>
Precautions
> Safety Information
Safety Information
Protected content
Protected content is limited to personal use only. Use of the content beyond this limit
requires permission of the copyright holders.
Handling the Reader
In order to comply with FCC radio-frequency radiation exposure guidelines for an
uncontrolled exposure, this device and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
If the Reader causes interference to radio or television reception, turn the Reader off
and move it away from the radio or television.
Refrain from using the Reader according to the in-flight announcements during take
off or landing in an aircraft.
Do not drop, or put any heavy object on top of the Reader or apply a strong shock to
the Reader. It may cause a malfunction or damage.
Never subject the Reader to extremes of light, temperature, moisture or vibration.
Do not leave the Reader on an unstable surface.
If any object is placed on the touchscreen, it may cause a malfunction. When not in
use, leave the Reader in sleep mode, or turn it off.
When using the Reader internationally, it is your responsibility to ensure that the
Reader is used in compliance with the following specifications:
AC voltage
Wireless products regulations
Other safety regulations or requirements
Do not touch the terminals of the Reader with a finger or metallic object, as it may
cause malfunction.
Never leave the Reader exposed to high temperature, such as in a car parked in the
sun or under direct sunlight.
Avoiding water and moisture
Note that condensation may form temporarily in cases such as when the player is
moved quickly from a low-temperature environment to a high temperature
environment or used in a room that has a heater just turned on. Condensation
creates a phenomenon where moisture in the air adheres to surfaces such as metal
panels, etc., and then changes to liquid. If condensation forms in the Reader, leave it
turned off until the condensation disappears. If you use the Reader with
condensation present, a malfunction may result.
The Reader is not waterproof. Remember to follow the precautions below.
Be careful not to drop the Reader into a sink or other container filled with water.
Do not use the Reader in humid locations or bad weather, such as in the rain or
snow.
Do not get the Reader wet.
If you touch the Reader with wet hands, or put the Reader in a damp article of
clothing, the Reader may get wet and this may cause a malfunction.
Charging the Reader
Heat may build up in the Reader while charging, or if it is used for an extended
period of time.
Use the supplied USB cable or the optional AC adapter (PRSA-AC10/PRSA-AC1A,
