Sony RDR-VX420, Operating Instructions Manual

Page: 110 / 132

110
Factory Setting
Allows you to return the setup settings to their
default settings. Note that all of your previous
settings will be lost.
1
Select “Factory Setting,” and press ENTER.
2
Select “Start,” and press ENTER.
The setup settings return to their default
settings.
3
Press ENTER when “Finish” appears.
The power automatically turns off and then on
again, and the recorder is reset to the factory
settings.
When the “Easy Setup” display appears,
follow the instructions for Easy Setup
(page 22) from step 4.
Easy Setup
(Resetting the Recorder)
Select this to run the Easy Setup programme.
1
Select “Easy Setup” in the “Setup”
display.
2
Select “Start,” and press ENTER.
3
Follow the instructions for Easy Setup
(page 22) from step 4.
Easy Setup
Follow the guide to make initial settings.
Before you start,
check that you have made all necessary connections.
Start Cancel
10:10